Parsing Process

Parsing process for f(n)

This process is invoked when the descriptor of a syntax element in the syntax tables is equal to f(n).

The next n bits are read from the bit stream.

This process is specified as follows:

x = 0
for ( i = 0; i < n; i++ ) {
    x = 2 * x + read_bit( )
}

read_bit( ) reads the next bit from the bitstream and advances the bitstream position indicator by 1. If the bitstream is provided as a series of bytes, then the first bit is given by the most significant bit of the first byte.

The value for the syntax element is given by x.

Parsing process for symbol decoder

General

The entropy decoder is referred to as the "Symbol decoder" and the functions init_symbol( sz ), exit_symbol( ), read_symbol( cdf ), and read_bool( ) are used in this Specification to indicate the entropy decoding operation.

Initialization process for symbol decoder

The input to this process is a variable sz specifying the number of bytes to be read by the Symbol decoder.

This process is invoked when the function init_symbol( sz ) is called from the syntax structure.

Note: The bit position will always be byte aligned when init_symbol is invoked because the uncompressed header and the data partitions are always a whole number of bytes long.

The variable numBits is set equal to Min( sz * 8, 15).

The variable buf is read using the f(numBits) parsing process.

The variable paddedBuf is set equal to ( buf << (15 - numBits) ).

The variable SymbolValue is set to ((1 << 15) - 1) ^ paddedBuf.

The variable SymbolRange is set to 1 << 15.

The variable SymbolMaxBits is set to 8 * sz - 15.

SymbolMaxBits (when non-negative) represents the number of bits still available to be read. It is allowed for this number to go negative (either here or during read_symbol). SymbolMaxBits (when negative) signifies that all available bits have been read, and that -SymbolMaxBits of padding zero bits have been used in the symbol decoding process. These padding zero bits are not present in the bitstream.

The array TileIntraFrameYModeCdf is set equal to a copy of Default_Intra_Frame_Y_Mode_Cdf.

A copy is made of each of the CDF arrays mentioned in the semantics for init_coeff_cdfs and init_non_coeff_cdfs. The name of the copy is the name of the CDF array prefixed with "Tile". This copying produces the following arrays:

  • TileYModeCdf

  • TileUVModeCflNotAllowedCdf

  • TileUVModeCflAllowedCdf

  • TileAngleDeltaCdf

  • TileIntrabcCdf

  • TilePartitionW8Cdf

  • TilePartitionW16Cdf

  • TilePartitionW32Cdf

  • TilePartitionW64Cdf

  • TilePartitionW128Cdf

  • TileSegmentIdCdf

  • TileSegmentIdPredictedCdf

  • TileTx8x8Cdf

  • TileTx16x16Cdf

  • TileTx32x32Cdf

  • TileTx64x64Cdf

  • TileTxfmSplitCdf

  • TileFilterIntraModeCdf

  • TileFilterIntraCdf

  • TileInterpFilterCdf

  • TileMotionModeCdf

  • TileNewMvCdf

  • TileZeroMvCdf

  • TileRefMvCdf

  • TileCompoundModeCdf

  • TileDrlModeCdf

  • TileIsInterCdf

  • TileCompModeCdf

  • TileSkipModeCdf

  • TileSkipCdf

  • TileCompRefCdf

  • TileCompBwdRefCdf

  • TileSingleRefCdf

  • TileMvJointCdf

  • TileMvSignCdf

  • TileMvClassCdf

  • TileMvClass0BitCdf

  • TileMvFrCdf

  • TileMvClass0FrCdf

  • TileMvClass0HpCdf

  • TileMvBitCdf

  • TileMvHpCdf

  • TilePaletteYModeCdf

  • TilePaletteUVModeCdf

  • TilePaletteYSizeCdf

  • TilePaletteUVSizeCdf

  • TilePaletteSize2YColorCdf

  • TilePaletteSize2UVColorCdf

  • TilePaletteSize3YColorCdf

  • TilePaletteSize3UVColorCdf

  • TilePaletteSize4YColorCdf

  • TilePaletteSize4UVColorCdf

  • TilePaletteSize5YColorCdf

  • TilePaletteSize5UVColorCdf

  • TilePaletteSize6YColorCdf

  • TilePaletteSize6UVColorCdf

  • TilePaletteSize7YColorCdf

  • TilePaletteSize7UVColorCdf

  • TilePaletteSize8YColorCdf

  • TilePaletteSize8UVColorCdf

  • TileDeltaQCdf

  • TileDeltaLFCdf

  • TileDeltaLFMultiCdf[ i ] for i = 0..FRAME_LF_COUNT-1

  • TileIntraTxTypeSet1Cdf

  • TileIntraTxTypeSet2Cdf

  • TileInterTxTypeSet1Cdf

  • TileInterTxTypeSet2Cdf

  • TileInterTxTypeSet3Cdf

  • TileUseObmcCdf

  • TileInterIntraCdf

  • TileCompRefTypeCdf

  • TileCflSignCdf

  • TileUniCompRefCdf

  • TileWedgeInterIntraCdf

  • TileCompGroupIdxCdf

  • TileCompoundIdxCdf

  • TileCompoundTypeCdf

  • TileInterIntraModeCdf

  • TileWedgeIndexCdf

  • TileCflAlphaCdf

  • TileUseWienerCdf

  • TileUseSgrprojCdf

  • TileRestorationTypeCdf

  • TileTxbSkipCdf

  • TileEobPt16Cdf

  • TileEobPt32Cdf

  • TileEobPt64Cdf

  • TileEobPt128Cdf

  • TileEobPt256Cdf

  • TileEobPt512Cdf

  • TileEobPt1024Cdf

  • TileEobExtraCdf

  • TileDcSignCdf

  • TileCoeffBaseEobCdf

  • TileCoeffBaseCdf

  • TileCoeffBrCdf

Boolean decoding process

This process decodes a pseudo-raw bit assuming equal probability for decoding a 0 or a 1.

This process is invoked when the function read_bool( ) is called from the read_literal function in Parsing process for read_literal.

An array cdf of length 3 is constructed as follows:

cdf[ 0 ] = 1 << 14
cdf[ 1 ] = 1 << 15
cdf[ 2 ] = 0

The output of this process is given by read_symbol( cdf ).

Note: This cdf array is constructed each time read_bool is invoked. This means that implementations can omit the cdf update performed by read_symbol when invoked from read_bool because the modified values are never used.

Exit process for symbol decoder

This process is invoked when the function exit_symbol( ) is called from the syntax structure.

It is a requirement of bitstream conformance that SymbolMaxBits is greater than or equal to -14 whenever this process is invoked.

The variable trailingBitPosition is set equal to get_position() - Min(15, SymbolMaxBits+15).

The bitstream position indicator is advanced by Max(0,SymbolMaxBits). (This skips over any trailing bits that have not already been read during symbol decode.)

The variable paddingEndPosition is set equal to get_position().

Note: paddingEndPosition will always be a multiple of 8 indicating that the bit position is byte aligned.

It is a requirement of bitstream conformance that the bit at position trailingBitPosition is equal to 1.

It is a requirement of bitstream conformance that the bit at position x is equal to 0 for values of x strictly between trailingBitPosition and paddingEndPosition.

Note: This exit process consumes the OBU trailing bits for a tile group.

If disable_frame_end_update_cdf is equal to 0 and TileNum is equal to context_update_tile_id, a copy is made of the final CDF values for each of the CDF arrays mentioned in the semantics for init_coeff_cdfs and init_non_coeff_cdfs. The name of the destination for the copy is the name of the CDF array prefixed with "Saved". The name of the source for the copy is the name of the CDF array prefixed with "Tile". For example, an array SavedYModeCdf will be created with values equal to TileYModeCdf.

Parsing process for read_literal

This process is invoked when the function read_literal( n ) is invoked.

This process is specified as follows:

x = 0
for ( i = 0 ; i < n; i++ ) {
    x = 2 * x + read_bool( )
}

The return value for the function is given by x.

Symbol decoding process

The input to this process is an array cdf of length N + 1 which specifies the cumulative distribution for a symbol with N possible values.

The output of this process is the variable symbol, containing a decoded syntax element. The process also modifies the input array cdf to adapt the probabilities to the content of the stream.

This process is invoked when the function read_symbol( cdf ) is called.

Note: When this process is invoked, N will be greater than 1 and cdf[ N-1 ] will be equal to 1 << 15.

The variables cur, prev, and symbol are calculated as follows:

cur = SymbolRange
symbol = -1
do {
  symbol++
  prev = cur
  f = ( 1 << 15 ) - cdf[ symbol ]
  cur = ((SymbolRange >> 8) * (f >> EC_PROB_SHIFT)) >> (7 - EC_PROB_SHIFT)
  cur += EC_MIN_PROB * (N - symbol - 1)
} while ( SymbolValue < cur )

Note: Implementations may prefer to store the inverse cdf to move the subtraction out of this loop.

The variable SymbolRange is set to prev - cur.

The variable SymbolValue is set equal to SymbolValue - cur.

The range and value are renormalized by the following ordered steps:

  1. The variable bits is set to 15 – FloorLog2( SymbolRange ). This represents the number of new bits to be added to SymbolValue.

  2. The variable SymbolRange is set to SymbolRange << bits.

  3. The variable numBits is set equal to Min( bits, Max(0, SymbolMaxBits) ). This represents the number of new bits to read from the bitstream.

  4. The variable newData is read using the f(numBits) parsing process.

  5. The variable paddedData is set equal to newData << ( bits - numBits ).

  6. The variable SymbolValue is set to paddedData ^ ( ( ( SymbolValue + 1 ) << bits ) - 1 ).

  7. The variable SymbolMaxBits is set to SymbolMaxBits - bits.

Note: bits may be equal to 0, in which case these ordered steps have no effect.

If disable_cdf_update is equal to 0, the cumulative distribution is updated as follows:

rate = 3 + ( cdf[ N ] > 15 ) + ( cdf[ N ] > 31 ) + Min( FloorLog2( N ), 2 )
tmp = 0
for ( i = 0; i < N - 1; i++ ) {
  tmp = ( i == symbol ) ? ( 1 << 15 ) : tmp
  if ( tmp < cdf[ i ] ) {
    cdf[ i ] -= ( ( cdf[ i ] - tmp ) >> rate )
  } else {
    cdf[ i ] += ( ( tmp - cdf[ i ] ) >> rate )
  }
}
cdf[ N ] += ( cdf[ N ] < 32 )

Note: The last entry of the cdf array is used to keep a count of the number of times the symbol has been decoded (up to a maximum of 32). This allows the cdf adaption rate to depend on the number of times the symbol has been decoded.

The return value from the function is given by symbol.

Parsing process for CDF encoded syntax elements

General

This process is invoked when the descriptor of a syntax element in the syntax tables is equal to S.

The input to this process is the name of a syntax element.

Cdf selection process specifies how a CDF array is chosen for the syntax element. The variable cdf is set equal to a reference to this CDF array.

Note: The array must be passed by reference because read_symbol will adjust the array contents.

The output of this process is the result of calling the function read_symbol( cdf ).

Cdf selection process

The input to this process is the name of a syntax element.

The output of this process is a reference to a CDF array.

When the description in this section uses variables, these variables are taken to have the values defined by the syntax tables at the point that the syntax element is being decoded.

The probabilities depend on the syntax element as follows:

use_intrabc: The cdf for use_intrabc is given by TileIntrabcCdf.

intra_frame_y_mode: The cdf for intra_frame_y_mode is given by TileIntraFrameYModeCdf[ abovemode ][ leftmode ] where abovemode and leftmode are the intra modes used for the blocks immediately above and to the left of this block and are computed as:

abovemode = Intra_Mode_Context[ AvailU ? YModes[ MiRow - 1 ][ MiCol ] : DC_PRED ]
leftmode = Intra_Mode_Context[ AvailL ? YModes[ MiRow ][ MiCol - 1] : DC_PRED ]

where Intra_Mode_Context is defined as follows:

Intra_Mode_Context[ INTRA_MODES ] = {
  0, 1, 2, 3, 4, 4, 4, 4, 3, 0, 1, 2, 0
}

Note: We are using a 2D array to store the YModes and UVModes for clarity. It is possible to reduce memory consumption by only storing one intra mode for each 4x4 horizontal and vertical position, i.e. to use two 1D arrays instead.

y_mode: The cdf for y_mode is given by TileYModeCdf[ ctx ] where the variable ctx is computed as Size_Group[ MiSize ].

uv_mode: The cdf for uv_mode is derived as follows:

  • If Lossless is equal to 1 and get_plane_residual_size( MiSize, 1 ) is equal to BLOCK_4X4, the cdf is given by TileUVModeCflAllowedCdf[ YMode ].

  • Otherwise, if Lossless is equal to 0 and Max( Block_Width[ MiSize ], Block_Height[ MiSize ] ) <= 32, the cdf is given by TileUVModeCflAllowedCdf[ YMode ].

  • Otherwise, the cdf is given by TileUVModeCflNotAllowedCdf[ YMode ].

angle_delta_y: The cdf for angle_delta_y is given by TileAngleDeltaCdf[YMode - V_PRED].

angle_delta_uv: The cdf for angle_delta_uv is given by TileAngleDeltaCdf[UVMode - V_PRED].

partition: The variable ctx is computed as follows:

bsl = Mi_Width_Log2[ bSize ]
above = AvailU && ( Mi_Width_Log2[ MiSizes[ r - 1 ][ c ] ] < bsl )
left = AvailL && ( Mi_Height_Log2[ MiSizes[ r ][ c - 1 ] ] < bsl )
ctx = left * 2 + above

The cdf is derived as follows:

  • If bsl is equal to 1, the cdf is given by TilePartitionW8Cdf[ ctx ].

  • Otherwise, if bsl is equal to 2, the cdf is given by TilePartitionW16Cdf[ ctx ].

  • Otherwise, if bsl is equal to 3, the cdf is given by TilePartitionW32Cdf[ ctx ].

  • Otherwise, if bsl is equal to 4, the cdf is given by TilePartitionW64Cdf[ ctx ].

  • Otherwise (bsl is equal to 5), the cdf is given by TilePartitionW128Cdf[ ctx ].

split_or_horz: split_or_horz uses the same derivation for the variable ctx as for the syntax element partition.

The array partitionCdf is derived according to the cdf derivation procedure for the syntax element partition (note that bsl is never equal to 1 when decoding split_or_horz).

The cdf to return is given by an array of length 3 which is constructed as follows:

psum = ( partitionCdf[ PARTITION_VERT ] - partitionCdf[ PARTITION_VERT - 1 ] +
         partitionCdf[ PARTITION_SPLIT ] - partitionCdf[ PARTITION_SPLIT - 1 ] +
         partitionCdf[ PARTITION_HORZ_A ] - partitionCdf[ PARTITION_HORZ_A - 1 ] +
         partitionCdf[ PARTITION_VERT_A ] - partitionCdf[ PARTITION_VERT_A - 1 ] +
         partitionCdf[ PARTITION_VERT_B ] - partitionCdf[ PARTITION_VERT_B - 1 ] )
if ( bSize != BLOCK_128X128 )
    psum += partitionCdf[ PARTITION_VERT_4 ] - partitionCdf[ PARTITION_VERT_4 - 1 ] )
cdf[0] = ( 1 << 15 ) - psum
cdf[1] = 1 << 15
cdf[2] = 0

Note: The syntax element split_or_horz is not allowed to return a PARTITION_VERT, so the probability for a vertical partition is assigned to the probability for the split partition.

split_or_vert: split_or_vert uses the same derivation for the variable ctx as for the syntax element partition.

The array partitionCdf is derived according to the cdf derivation procedure for the syntax element partition (note that bsl is never equal to 1 when decoding split_or_vert).

The cdf to return is given by an array of length 3 which is constructed as follows:

psum = ( partitionCdf[ PARTITION_HORZ ] - partitionCdf[ PARTITION_HORZ - 1 ] +
         partitionCdf[ PARTITION_SPLIT ] - partitionCdf[ PARTITION_SPLIT - 1 ] +
         partitionCdf[ PARTITION_HORZ_A ] - partitionCdf[ PARTITION_HORZ_A - 1 ] +
         partitionCdf[ PARTITION_HORZ_B ] - partitionCdf[ PARTITION_HORZ_B - 1 ] +
         partitionCdf[ PARTITION_VERT_A ] - partitionCdf[ PARTITION_VERT_A - 1 ] )
if ( bSize != BLOCK_128X128 )
    psum += partitionCdf[ PARTITION_HORZ_4 ] - partitionCdf[ PARTITION_HORZ_4 - 1 ]
cdf[0] = ( 1 << 15 ) - psum
cdf[1] = 1 << 15
cdf[2] = 0

tx_depth: the cdf depends on the value of maxRectTxSize and ctx, where ctx is computed by:

maxTxWidth = Tx_Width[ maxRectTxSize ]
maxTxHeight = Tx_Height[ maxRectTxSize ]

if ( AvailU && IsInters[ MiRow - 1 ][ MiCol ] ) {
    aboveW = Block_Width[ MiSizes[ MiRow - 1 ][ MiCol ] ]
} else if ( AvailU ) {
    aboveW = get_above_tx_width( MiRow, MiCol )
} else {
    aboveW = 0
}

if ( AvailL && IsInters[ MiRow ][ MiCol - 1 ] ) {
    leftH = Block_Height[ MiSizes[ MiRow ][ MiCol - 1 ] ]
} else if ( AvailL ) {
    leftH = get_left_tx_height( MiRow, MiCol )
} else {
    leftH = 0
}

ctx = ( aboveW >= maxTxWidth ) + ( leftH >= maxTxHeight )

where get_above_tx_width and get_left_tx_height are functions defined as specified in the CDF selection process for txfm_split.

The cdf to return is given by:

  • TileTx64x64Cdf[ ctx ] if maxTxDepth is equal to 4.

  • TileTx32x32Cdf[ ctx ] if maxTxDepth is equal to 3.

  • TileTx16x16Cdf[ ctx ] if maxTxDepth is equal to 2.

  • TileTx8x8Cdf[ ctx ] otherwise.

txfm_split: the cdf is given by TileTxfmSplitCdf[ ctx ], where ctx is computed by:

above = get_above_tx_width( row, col ) < Tx_Width[ txSz ]
left = get_left_tx_height( row, col ) < Tx_Height[ txSz ]
size = Min( 64, Max( Block_Width[ MiSize ], Block_Height[ MiSize ] ) )
maxTxSz = find_tx_size( size, size )
txSzSqrUp = Tx_Size_Sqr_Up[ txSz ]
ctx = (txSzSqrUp != maxTxSz) * 3 +
      (TX_SIZES - 1 - maxTxSz) * 6 + above + left

where get_above_tx_width and get_left_tx_height are functions defined as follows:

get_above_tx_width( row, col ) {
    if ( row == MiRow ) {
        if ( !AvailU ) {
            return 64
        } else if ( Skips[ row - 1 ][ col ] && IsInters[ row - 1 ][ col ] ) {
            return Block_Width[ MiSizes[ row - 1 ][ col ] ]
        }
    }
    return Tx_Width[ InterTxSizes[ row - 1 ][ col ] ]
}

get_left_tx_height( row, col ) {
    if ( col == MiCol ) {
        if ( !AvailL ) {
            return 64
        } else if ( Skips[ row ][ col - 1 ] && IsInters[ row ][ col - 1 ] ) {
            return Block_Height[ MiSizes[ row ][ col - 1 ] ]
        }
    }
    return Tx_Height[ InterTxSizes[ row ][ col - 1 ] ]
}

segment_id: The cdf is given by TileSegmentIdCdf[ ctx ] where ctx is computed by:

if ( prevUL < 0 )
    ctx = 0
else if ( (prevUL == prevU) && (prevUL == prevL) )
    ctx = 2
else if ( (prevUL == prevU) || (prevUL == prevL) || (prevU == prevL) )
    ctx = 1
else
    ctx = 0

seg_id_predicted: the cdf is given by TileSegmentIdPredictedCdf[ ctx ], where ctx is computed by:

ctx = LeftSegPredContext[ MiRow ] + AboveSegPredContext[ MiCol ]

new_mv: the cdf is given by TileNewMvCdf[ NewMvContext ].

zero_mv: the cdf is given by TileZeroMvCdf[ ZeroMvContext ].

ref_mv: the cdf is given by TileRefMvCdf[ RefMvContext ].

drl_mode: the cdf is given by TileDrlModeCdf[ DrlCtxStack[ idx ] ].

is_inter: the cdf is given by TileIsInterCdf[ ctx ] where ctx is computed by:

if ( AvailU && AvailL )
    ctx = (LeftIntra && AboveIntra) ? 3 : LeftIntra || AboveIntra
else if ( AvailU || AvailL )
    ctx = 2 * (AvailU ? AboveIntra : LeftIntra)
else
    ctx = 0

use_filter_intra: the cdf is given by TileFilterIntraCdf[ MiSize ].

filter_intra_mode: the cdf is given by TileFilterIntraModeCdf.

comp_mode: the cdf is given by TileCompModeCdf[ ctx ] where ctx is computed by:

if ( AvailU && AvailL ) {
    if ( AboveSingle && LeftSingle )
    ctx = check_backward( AboveRefFrame[ 0 ] )
        ^ check_backward( LeftRefFrame[ 0 ] )
    else if ( AboveSingle )
        ctx = 2 + ( check_backward( AboveRefFrame[ 0 ] ) || AboveIntra)
    else if ( LeftSingle )
        ctx = 2 + ( check_backward( LeftRefFrame[ 0 ] ) || LeftIntra)
    else
        ctx = 4
} else if ( AvailU ) {
    if ( AboveSingle )
        ctx = check_backward( AboveRefFrame[ 0 ] )
    else
        ctx = 3
} else if ( AvailL ) {
    if ( LeftSingle )
        ctx= check_backward( LeftRefFrame[ 0 ] )
    else
        ctx = 3
} else {
    ctx = 1
}

where check_backward is a function specified as follows:

check_backward(refFrame) {
  return ( ( refFrame >= BWDREF_FRAME ) && ( refFrame <= ALTREF_FRAME ) )
}

skip_mode: the cdf is given by TileSkipModeCdf[ ctx ] where ctx is computed by:

    ctx = 0
    if ( AvailU )
        ctx += SkipModes[ MiRow - 1 ][ MiCol ]
    if ( AvailL )
        ctx += SkipModes[ MiRow ][ MiCol - 1 ]

skip: the cdf is given by TileSkipCdf[ ctx ] where ctx is computed by:

    ctx = 0
    if ( AvailU )
        ctx += Skips[ MiRow - 1 ][ MiCol ]
    if ( AvailL )
        ctx += Skips[ MiRow ][ MiCol - 1 ]

comp_ref: the cdf is given by TileCompRefCdf[ ctx ][ 0 ] where ctx is computed by:

last12Count = count_refs( LAST_FRAME ) + count_refs( LAST2_FRAME )
last3GoldCount = count_refs( LAST3_FRAME ) + count_refs( GOLDEN_FRAME )
ctx = ref_count_ctx( last12Count, last3GoldCount )

where count_refs is defined as:

count_refs(frameType) {
    c = 0
    if ( AvailU ) {
        if ( AboveRefFrame[ 0 ] == frameType ) c++
        if ( AboveRefFrame[ 1 ] == frameType ) c++
    }
    if ( AvailL ) {
        if ( LeftRefFrame[ 0 ] == frameType ) c++
        if ( LeftRefFrame[ 1 ] == frameType ) c++
    }
    return c
}

and ref_count_ctx is defined as:

ref_count_ctx(counts0, counts1) {
  if ( counts0 < counts1 )
    return 0
  else if ( counts0 == counts1 )
    return 1
  else
    return 2
}

comp_ref_p1: the cdf is given by TileCompRefCdf[ ctx ][ 1 ] where ctx is computed by:

lastCount = count_refs( LAST_FRAME )
last2Count = count_refs( LAST2_FRAME )
ctx = ref_count_ctx( lastCount, last2Count )

where count_refs and ref_count_ctx are the same as given in the CDF selection process for comp_ref.

comp_ref_p2: the cdf is given by TileCompRefCdf[ ctx ][ 2 ] where ctx is computed by:

last3Count = count_refs( LAST3_FRAME )
goldCount = count_refs( GOLDEN_FRAME )
ctx = ref_count_ctx( last3Count, goldCount )

where count_refs and ref_count_ctx are the same as given in the CDF selection process for comp_ref.

comp_bwdref: the cdf is given by TileCompBwdRefCdf[ ctx ][ 0 ] where ctx is computed by:

brfarf2Count = count_refs( BWDREF_FRAME ) + count_refs( ALTREF2_FRAME )
arfCount = count_refs( ALTREF_FRAME )
ctx = ref_count_ctx( brfarf2Count, arfCount )

where count_refs and ref_count_ctx are the same as given in the CDF selection process for comp_ref.

comp_bwdref_p1: the cdf is given by TileCompBwdRefCdf[ ctx ][ 1 ] where ctx is computed by:

brfCount = count_refs( BWDREF_FRAME )
arf2Count = count_refs( ALTREF2_FRAME )
ctx = ref_count_ctx( brfCount, arf2Count )

where count_refs and ref_count_ctx are the same as given in the CDF selection process for comp_ref.

single_ref_p1: the cdf is given by TileSingleRefCdf[ ctx ][ 0 ] where ctx is computed by:

fwdCount = count_refs( LAST_FRAME )
fwdCount += count_refs( LAST2_FRAME )
fwdCount += count_refs( LAST3_FRAME )
fwdCount += count_refs( GOLDEN_FRAME )
bwdCount = count_refs( BWDREF_FRAME )
bwdCount += count_refs( ALTREF2_FRAME )
bwdCount += count_refs( ALTREF_FRAME )
ctx = ref_count_ctx( fwdCount, bwdCount )

where count_refs and ref_count_ctx are the same as given in the CDF selection process for comp_ref.

single_ref_p2: the cdf is given by TileSingleRefCdf[ ctx ][ 1 ] where ctx is computed as in the CDF selection process for comp_bwdref.

single_ref_p3: the cdf is given by TileSingleRefCdf[ ctx ][ 2 ] where ctx is computed as in the CDF selection process for comp_ref.

single_ref_p4: the cdf is given by TileSingleRefCdf[ ctx ][ 3 ] where ctx is computed as in the CDF selection process for comp_ref_p1.

single_ref_p5: the cdf is given by TileSingleRefCdf[ ctx ][ 4 ] where ctx is computed as in the CDF selection process for comp_ref_p2.

single_ref_p6: the cdf is given by TileSingleRefCdf[ ctx ][ 5 ] where ctx is computed as in the CDF selection process for comp_bwdref_p1.

compound_mode: the cdf is given by TileCompoundModeCdf[ ctx ] where ctx is computed by:

ctx = Compound_Mode_Ctx_Map[ RefMvContext >> 1 ][ Min(NewMvContext, COMP_NEWMV_CTXS - 1) ]

where Compound_Mode_Ctx_Map is defined as follows:

Compound_Mode_Ctx_Map[ 3 ][ COMP_NEWMV_CTXS ] = {
    { 0, 1, 1, 1, 1 },
    { 1, 2, 3, 4, 4 },
    { 4, 4, 5, 6, 7 }
}

interp_filter: the cdf is given by TileInterpFilterCdf[ ctx ] where ctx is computed by:

    ctx = ( ( dir & 1 ) * 2 + ( RefFrame[ 1 ] > INTRA_FRAME ) ) * 4
    leftType = 3
    aboveType = 3

    if ( AvailL ) {
        if ( RefFrames[ MiRow ][ MiCol - 1 ][ 0 ] == RefFrame[ 0 ] ||
             RefFrames[ MiRow ][ MiCol - 1 ][ 1 ] == RefFrame[ 0 ] )
            leftType = InterpFilters[ MiRow ] [ MiCol - 1 ][ dir ]
    }

    if ( AvailU ) {
        if ( RefFrames[ MiRow - 1 ][ MiCol ][ 0 ] == RefFrame[ 0 ] ||
             RefFrames[ MiRow - 1 ][ MiCol ][ 1 ] == RefFrame[ 0 ] )
            aboveType = InterpFilters[ MiRow - 1 ] [ MiCol ][ dir ]
    }

    if ( leftType == aboveType )
        ctx += leftType
    else if ( leftType == 3 )
        ctx += aboveType
    else if ( aboveType == 3 )
        ctx += leftType
    else
        ctx += 3

motion_mode: the cdf is given by TileMotionModeCdf[ MiSize ].

mv_joint: the cdf is given by TileMvJointCdf[ MvCtx ].

mv_sign: the cdf is given by TileMvSignCdf[ MvCtx ][ comp ].

mv_class: the cdf is given by TileMvClassCdf[ MvCtx ][ comp ].

mv_class0_bit: the cdf is given by TileMvClass0BitCdf[ MvCtx ][ comp ].

mv_class0_fr: the cdf is given by TileMvClass0FrCdf[ MvCtx ][ comp ][ mv_class0_bit ].

mv_class0_hp: the cdf is given by TileMvClass0HpCdf[ MvCtx ][ comp ].

mv_fr: the cdf is given by TileMvFrCdf[ MvCtx ][ comp ].

mv_hp: the cdf is given by TileMvHpCdf[ MvCtx ][ comp ].

mv_bit: the cdf is given by TileMvBitCdf[ MvCtx ][ comp ][ i ].

all_zero: the cdf is given by TileTxbSkipCdf[ txSzCtx ][ ctx ], where ctx is computed as follows:

maxX4 = MiCols
maxY4 = MiRows
if ( plane > 0 ) {
    maxX4 = maxX4 >> subsampling_x
    maxY4 = maxY4 >> subsampling_y
}

w = Tx_Width[txSz]
h = Tx_Height[txSz]

bsize = get_plane_residual_size( MiSize, plane )
bw = Block_Width[ bsize ]
bh = Block_Height[ bsize ]

if ( plane == 0 ) {
    top = 0
    left = 0
    for ( k = 0; k < w4; k++ ) {
        if ( x4 + k < maxX4 )
            top = Max( top, AboveLevelContext[ plane ][ x4 + k ] )
    }
    for ( k = 0; k < h4; k++ ) {
        if ( y4 + k < maxY4 )
            left = Max( left, LeftLevelContext[ plane ][ y4 + k ] )
    }
    top = Min( top, 255 )
    left = Min( left, 255 )
    if ( bw == w && bh == h ) {
        ctx = 0
    } else if ( top == 0 && left == 0 ) {
        ctx = 1
    } else if ( top == 0 || left == 0 ) {
        ctx = 2 + ( Max( top, left ) > 3 )
    } else if ( Max( top, left ) <= 3 ) {
        ctx = 4
    } else if ( Min( top, left ) <= 3 ) {
        ctx = 5
    } else {
        ctx = 6
    }
} else {
    above = 0
    left = 0
    for ( i = 0; i < w4; i++ ) {
        if ( x4 + i < maxX4 ) {
            above |= AboveLevelContext[ plane ][ x4 + i ]
            above |= AboveDcContext[ plane ][ x4 + i ]
        }
    }
    for ( i = 0; i < h4; i++ ) {
        if ( y4 + i < maxY4 ) {
            left |= LeftLevelContext[ plane ][ y4 + i ]
            left |= LeftDcContext[ plane ][ y4 + i ]
        }
    }
    ctx = ( above != 0 ) + ( left != 0 )
    ctx += 7
    if ( bw * bh > w * h )
        ctx += 3
}

eob_pt_16: the cdf is given by TileEobPt16Cdf[ ptype ][ ctx ], where ctx is computed as follows:

txType = compute_tx_type( plane, txSz, x4, y4 )
ctx = ( get_tx_class( txType ) == TX_CLASS_2D ) ? 0 : 1

where get_tx_class() is defined as in the CDF selection for coeff_base.

eob_pt_32: the cdf is given by TileEobPt32Cdf[ ptype ][ ctx ], where ctx is computed as for eob_pt_16.

eob_pt_64: the cdf is given by TileEobPt64Cdf[ ptype ][ ctx ], where ctx is computed as for eob_pt_16.

eob_pt_128: the cdf is given by TileEobPt128Cdf[ ptype ][ ctx ], where ctx is computed as for eob_pt_16.

eob_pt_256: the cdf is given by TileEobPt256Cdf[ ptype ][ ctx ], where ctx is computed as for eob_pt_16.

eob_pt_512: the cdf is given by TileEobPt512Cdf[ ptype ].

eob_pt_1024: the cdf is given by TileEobPt1024Cdf[ ptype ].

eob_extra: the cdf is given by TileEobExtraCdf[ txSzCtx ][ ptype ][ eobPt - 3 ].

coeff_base: the cdf is given by TileCoeffBaseCdf[ txSzCtx ][ ptype ][ ctx ], where ctx is computed as follows:

ctx = get_coeff_base_ctx(txSz, plane, x4, y4, scan[c], c, 0)

where get_coeff_base_ctx is defined as:

get_coeff_base_ctx( txSz, plane, blockX, blockY, pos, c, isEob ) {
    adjTxSz = Adjusted_Tx_Size[ txSz ]
    bwl = Tx_Width_Log2[ adjTxSz ]
    width = 1 << bwl
    height = Tx_Height[ adjTxSz ]
    txType = compute_tx_type( plane, txSz, blockX, blockY )
    if ( isEob ) {
        if ( c == 0 ) {
            return SIG_COEF_CONTEXTS - 4
        }
        if ( c <= (height << bwl) / 8 ) {
            return SIG_COEF_CONTEXTS - 3
        }
        if ( c <= (height << bwl) / 4 ) {
            return SIG_COEF_CONTEXTS - 2
        }
        return SIG_COEF_CONTEXTS - 1
    }
    txClass = get_tx_class( txType )
    row = pos >> bwl
    col = pos - (row << bwl)
    mag = 0

    for ( idx = 0; idx < SIG_REF_DIFF_OFFSET_NUM; idx++ ) {
        refRow = row + Sig_Ref_Diff_Offset[ txClass ][ idx ][ 0 ]
        refCol = col + Sig_Ref_Diff_Offset[ txClass ][ idx ][ 1 ]
        if ( refRow >= 0 &&
             refCol >= 0 &&
             refRow < height &&
             refCol < width ) {
            mag += Min( Abs( Quant[ (refRow << bwl) + refCol ] ), 3 )
        }
    }

    ctx = Min( ( mag + 1 ) >> 1, 4 )
    if ( txClass == TX_CLASS_2D ) {
        if ( row == 0 && col == 0 ) {
            return 0
        }
        return ctx + Coeff_Base_Ctx_Offset[ txSz ][ Min( row, 4 ) ][ Min( col, 4 ) ]
    }
    idx = ( txClass == TX_CLASS_VERT ) ? row : col
    return ctx + Coeff_Base_Pos_Ctx_Offset[ Min( idx, 2 ) ]
}

where get_tx_class is defined as:

get_tx_class( txType ) {
    if ( ( txType == V_DCT ) ||
         ( txType == V_ADST ) ||
         ( txType == V_FLIPADST ) ) {
        return TX_CLASS_VERT
    } else if ( ( txType == H_DCT ) ||
                ( txType == H_ADST ) ||
                ( txType == H_FLIPADST ) ) {
        return TX_CLASS_HORIZ
    } else
        return TX_CLASS_2D
}

Coeff_Base_Ctx_Offset is defined as:

Coeff_Base_Ctx_Offset[ TX_SIZES_ALL ][ 5 ][ 5 ] = {
  {
    { 0, 1, 6, 6, 0 },
    { 1, 6, 6, 21, 0 },
    { 6, 6, 21, 21, 0 },
    { 6, 21, 21, 21, 0 },
    { 0, 0, 0, 0, 0 }
  },
  {
    { 0, 1, 6, 6, 21 },
    { 1, 6, 6, 21, 21 },
    { 6, 6, 21, 21, 21 },
    { 6, 21, 21, 21, 21 },
    { 21, 21, 21, 21, 21 }
  },
  {
    { 0, 1, 6, 6, 21 },
    { 1, 6, 6, 21, 21 },
    { 6, 6, 21, 21, 21 },
    { 6, 21, 21, 21, 21 },
    { 21, 21, 21, 21, 21 }
  },
  {
    { 0, 1, 6, 6, 21 },
    { 1, 6, 6, 21, 21 },
    { 6, 6, 21, 21, 21 },
    { 6, 21, 21, 21, 21 },
    { 21, 21, 21, 21, 21 }
  },
  {
    { 0, 1, 6, 6, 21 },
    { 1, 6, 6, 21, 21 },
    { 6, 6, 21, 21, 21 },
    { 6, 21, 21, 21, 21 },
    { 21, 21, 21, 21, 21 }
  },
  {
    { 0, 11, 11, 11, 0 },
    { 11, 11, 11, 11, 0 },
    { 6, 6, 21, 21, 0 },
    { 6, 21, 21, 21, 0 },
    { 21, 21, 21, 21, 0 }
  },
  {
    { 0, 16, 6, 6, 21 },
    { 16, 16, 6, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 0, 0, 0, 0, 0 }
  },
  {
    { 0, 11, 11, 11, 11 },
    { 11, 11, 11, 11, 11 },
    { 6, 6, 21, 21, 21 },
    { 6, 21, 21, 21, 21 },
    { 21, 21, 21, 21, 21 }
  },
  {
    { 0, 16, 6, 6, 21 },
    { 16, 16, 6, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 }
  },
  {
    { 0, 11, 11, 11, 11 },
    { 11, 11, 11, 11, 11 },
    { 6, 6, 21, 21, 21 },
    { 6, 21, 21, 21, 21 },
    { 21, 21, 21, 21, 21 }
  },
  {
    { 0, 16, 6, 6, 21 },
    { 16, 16, 6, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 }
  },
  {
    { 0, 11, 11, 11, 11 },
    { 11, 11, 11, 11, 11 },
    { 6, 6, 21, 21, 21 },
    { 6, 21, 21, 21, 21 },
    { 21, 21, 21, 21, 21 }
  },
  {
    { 0, 16, 6, 6, 21 },
    { 16, 16, 6, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 }
  },
  {
    { 0, 11, 11, 11, 0 },
    { 11, 11, 11, 11, 0 },
    { 6, 6, 21, 21, 0 },
    { 6, 21, 21, 21, 0 },
    { 21, 21, 21, 21, 0 }
  },
  {
    { 0, 16, 6, 6, 21 },
    { 16, 16, 6, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 0, 0, 0, 0, 0 }
  },
  {
    { 0, 11, 11, 11, 11 },
    { 11, 11, 11, 11, 11 },
    { 6, 6, 21, 21, 21 },
    { 6, 21, 21, 21, 21 },
    { 21, 21, 21, 21, 21 }
  },
  {
    { 0, 16, 6, 6, 21 },
    { 16, 16, 6, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 }
  },
  {
    { 0, 11, 11, 11, 11 },
    { 11, 11, 11, 11, 11 },
    { 6, 6, 21, 21, 21 },
    { 6, 21, 21, 21, 21 },
    { 21, 21, 21, 21, 21 }
  },
  {
    { 0, 16, 6, 6, 21 },
    { 16, 16, 6, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 },
    { 16, 16, 21, 21, 21 }
  }
}

and Coeff_Base_Pos_Ctx_Offset is defined as:

Coeff_Base_Pos_Ctx_Offset[ 3 ] = {
  SIG_COEF_CONTEXTS_2D,
  SIG_COEF_CONTEXTS_2D + 5,
  SIG_COEF_CONTEXTS_2D + 10
}

coeff_base_eob: the cdf is given by TileCoeffBaseEobCdf[ txSzCtx ][ ptype ][ ctx ], where ctx is computed as follows:

ctx = get_coeff_base_ctx(txSz, plane, x4, y4, scan[c], c, 1) - SIG_COEF_CONTEXTS + SIG_COEF_CONTEXTS_EOB

where get_coeff_base_ctx() is as defined in the CDF selection for coeff_base.

dc_sign: the cdf is given by TileDcSignCdf[ ptype ][ ctx ], where ctx is computed as follows:

maxX4 = MiCols
maxY4 = MiRows
if ( plane > 0 ) {
    maxX4 = maxX4 >> subsampling_x
    maxY4 = maxY4 >> subsampling_y
}

dcSign = 0
for ( k = 0; k < w4; k++ ) {
    if ( x4 + k < maxX4 ) {
        sign = AboveDcContext[ plane ][ x4 + k ]
        if ( sign == 1 ) {
            dcSign--
        } else if ( sign == 2 ) {
            dcSign++
        }
    }
}
for ( k = 0; k < h4; k++ ) {
    if ( y4 + k < maxY4 ) {
        sign = LeftDcContext[ plane ][ y4 + k ]
        if ( sign == 1 ) {
            dcSign--
        } else if ( sign == 2 ) {
            dcSign++
        }
    }
}
if ( dcSign < 0 ) {
    ctx = 1
} else if ( dcSign > 0 ) {
    ctx = 2
} else {
    ctx = 0
}

coeff_br: the cdf is given by TileCoeffBrCdf[ Min( txSzCtx, TX_32X32 ) ][ ptype ][ ctx ], where ctx is computed as follows:

adjTxSz = Adjusted_Tx_Size[ txSz ]
bwl = Tx_Width_Log2[ adjTxSz ]
txw = Tx_Width[ adjTxSz ]
txh = Tx_Height[ adjTxSz ]
row = pos >> bwl
col = pos - (row << bwl)

mag = 0

txType = compute_tx_type( plane, txSz, x4, y4 )
txClass = get_tx_class( txType )

for ( idx = 0; idx < 3; idx++ ) {
    refRow = row + Mag_Ref_Offset_With_Tx_Class[ txClass ][ idx ][ 0 ]
    refCol = col + Mag_Ref_Offset_With_Tx_Class[ txClass ][ idx ][ 1 ]
    if ( refRow >= 0 &&
         refCol >= 0 &&
         refRow < txh &&
         refCol < (1 << bwl) ) {
        mag += Min( Quant[ refRow * txw + refCol ], COEFF_BASE_RANGE + NUM_BASE_LEVELS + 1 )
    }
}

mag = Min( ( mag + 1 ) >> 1, 6 )
if ( pos == 0 ) {
    ctx = mag
} else if ( txClass == 0 ) {
    if ( ( row < 2 ) && ( col < 2 ) ) {
        ctx = mag + 7
    } else {
        ctx = mag + 14
    }
} else {
    if ( txClass == 1 ) {
        if ( col == 0 ) {
            ctx = mag + 7
        } else {
            ctx = mag + 14
        }
    } else {
        if ( row == 0 ) {
            ctx = mag + 7
        } else {
            ctx = mag + 14
        }
    }
}

where get_tx_class() is defined as in the CDF selection for coeff_base, and Mag_Ref_Offset_With_Tx_Class is defined as:

Mag_Ref_Offset_With_Tx_Class[ 3 ][ 3 ][ 2 ] = {
  { { 0, 1 }, { 1, 0 }, { 1, 1 } },
  { { 0, 1 }, { 1, 0 }, { 0, 2 } },
  { { 0, 1 }, { 1, 0 }, { 2, 0 } }
}

has_palette_y: the cdf is given by TilePaletteYModeCdf[ bsizeCtx ][ ctx ] where ctx is computed as follows:

ctx = 0
if ( AvailU && PaletteSizes[ 0 ][ MiRow - 1 ][ MiCol ] > 0 )
    ctx += 1
if ( AvailL && PaletteSizes[ 0 ][ MiRow ][ MiCol - 1 ] > 0 )
    ctx += 1

has_palette_uv: the cdf is given by TilePaletteUVModeCdf[ ctx ] where ctx is computed as follows:

ctx = ( PaletteSizeY > 0 ) ? 1 : 0

palette_size_y_minus_2: the cdf is given by TilePaletteYSizeCdf[ bsizeCtx ].

palette_size_uv_minus_2: the cdf is given by TilePaletteUVSizeCdf[ bsizeCtx ].

palette_color_idx_y: the cdf depends on PaletteSizeY, as follows:

PaletteSizeY cdf
2 TilePaletteSize2YColorCdf[ ctx ]
3 TilePaletteSize3YColorCdf[ ctx ]
4 TilePaletteSize4YColorCdf[ ctx ]
5 TilePaletteSize5YColorCdf[ ctx ]
6 TilePaletteSize6YColorCdf[ ctx ]
7 TilePaletteSize7YColorCdf[ ctx ]
8 TilePaletteSize8YColorCdf[ ctx ]

where ctx is computed as follows:

ctx = Palette_Color_Context[ ColorContextHash ]

palette_color_idx_uv: the cdf depends on PaletteSizeUV, as follows:

PaletteSizeUV cdf
2 TilePaletteSize2UVColorCdf[ ctx ]
3 TilePaletteSize3UVColorCdf[ ctx ]
4 TilePaletteSize4UVColorCdf[ ctx ]
5 TilePaletteSize5UVColorCdf[ ctx ]
6 TilePaletteSize6UVColorCdf[ ctx ]
7 TilePaletteSize7UVColorCdf[ ctx ]
8 TilePaletteSize8UVColorCdf[ ctx ]

where ctx is computed as follows:

ctx = Palette_Color_Context[ ColorContextHash ]

delta_q_abs: the cdf is given by TileDeltaQCdf.

delta_lf_abs: the cdf is derived as follows:

  • If delta_lf_multi is equal to 0, the cdf is given by TileDeltaLFCdf.

  • Otherwise (delta_lf_multi is equal to 1), the cdf is given by TileDeltaLFMultiCdf[ i ].

intra_tx_type: the cdf depends on the variable set, as follows:

set cdf
TX_SET_INTRA_1 TileIntraTxTypeSet1Cdf[ Tx_Size_Sqr[ txSz ] ][ intraDir ]
TX_SET_INTRA_2 TileIntraTxTypeSet2Cdf[ Tx_Size_Sqr[ txSz ] ][ intraDir ]

where the variable intraDir is derived as follows:

  • If use_filter_intra is equal to 1, intraDir is set equal to Filter_Intra_Mode_To_Intra_Dir[ filter_intra_mode ],

  • Otherwise (use_filter_intra is equal to 0), intraDir is set equal to YMode.

The table Filter_Intra_Mode_To_Intra_Dir is defined as:

Filter_Intra_Mode_To_Intra_Dir[ INTRA_FILTER_MODES ] = {
  DC_PRED, V_PRED, H_PRED, D157_PRED, DC_PRED
}

inter_tx_type: the cdf depends on the variable set, as follows:

set cdf
TX_SET_INTER_1 TileInterTxTypeSet1Cdf[ Tx_Size_Sqr[ txSz ] ]
TX_SET_INTER_2 TileInterTxTypeSet2Cdf
TX_SET_INTER_3 TileInterTxTypeSet3Cdf[ Tx_Size_Sqr[ txSz ] ]

comp_ref_type: The cdf is given by TileCompRefTypeCdf[ ctx ], where ctx is computed as follows:

above0 = AboveRefFrame[ 0 ]
above1 = AboveRefFrame[ 1 ]
left0 = LeftRefFrame[ 0 ]
left1 = LeftRefFrame[ 1 ]
aboveCompInter = AvailU && !AboveIntra && !AboveSingle
leftCompInter = AvailL && !LeftIntra && !LeftSingle
aboveUniComp = aboveCompInter && is_samedir_ref_pair(above0, above1)
leftUniComp = leftCompInter && is_samedir_ref_pair(left0, left1)

if ( AvailU && !AboveIntra && AvailL && !LeftIntra ) {
    samedir = is_samedir_ref_pair(above0, left0)

    if ( !aboveCompInter && !leftCompInter ) {
        ctx = 1 + 2 * samedir
    } else if ( !aboveCompInter ) {
        if ( !leftUniComp )
            ctx = 1
        else
            ctx = 3 + samedir
    } else if ( !leftCompInter ) {
        if ( !aboveUniComp )
            ctx = 1
        else
            ctx = 3 + samedir
    } else {
        if ( !aboveUniComp && !leftUniComp )
            ctx = 0
        else if ( !aboveUniComp || !leftUniComp )
            ctx = 2
        else
            ctx = 3 + ((above0 == BWDREF_FRAME) == (left0 == BWDREF_FRAME))
    }
} else if ( AvailU && AvailL ) {
    if ( aboveCompInter )
        ctx = 1 + 2 * aboveUniComp
    else if ( leftCompInter )
        ctx = 1 + 2 * leftUniComp
    else
        ctx = 2
} else if ( aboveCompInter ) {
    ctx = 4 * aboveUniComp
} else if ( leftCompInter ) {
    ctx = 4 * leftUniComp
} else {
    ctx = 2
}

where is_samedir_ref_pair is defined as:

is_samedir_ref_pair(ref0, ref1) {
  return (ref0 >= BWDREF_FRAME) == (ref1 >= BWDREF_FRAME)
}

uni_comp_ref: The cdf is given by TileUniCompRefCdf[ ctx ][ 0 ], where ctx is computed as in the CDF selection process for single_ref_p1.

uni_comp_ref_p1: The cdf is given by TileUniCompRefCdf[ ctx ][ 1 ], where ctx is computed as follows:

last2Count = count_refs( LAST2_FRAME )
last3GoldCount = count_refs( LAST3_FRAME ) + count_refs( GOLDEN_FRAME )
ctx = ref_count_ctx( last2Count, last3GoldCount )

where count_refs and ref_count_ctx are the same as given in the CDF selection process for comp_ref.

uni_comp_ref_p2: The cdf is given by TileUniCompRefCdf[ ctx ][ 2 ], where ctx is computed as in the CDF selection process for comp_ref_p2.

comp_group_idx: The cdf is given by TileCompGroupIdxCdf[ ctx ], where ctx is computed as follows:

ctx = 0
if ( AvailU ) {
  if ( !AboveSingle )
    ctx += CompGroupIdxs[ MiRow - 1 ][ MiCol ]
  else if ( AboveRefFrame[ 0 ] == ALTREF_FRAME )
    ctx += 3
}
if ( AvailL ) {
  if ( !LeftSingle )
    ctx += CompGroupIdxs[ MiRow ][ MiCol - 1 ]
  else if ( LeftRefFrame[ 0 ] == ALTREF_FRAME )
    ctx += 3
}
ctx = Min( 5, ctx )

compound_idx: The cdf is given by TileCompoundIdxCdf[ ctx ], where ctx is computed as follows:

fwd = Abs( get_relative_dist( OrderHints[ RefFrame[ 0 ] ], OrderHint ) )
bck = Abs( get_relative_dist( OrderHints[ RefFrame[ 1 ] ], OrderHint ) )
ctx = ( fwd == bck ) ? 3 : 0
if ( AvailU ) {
  if ( !AboveSingle )
    ctx += CompoundIdxs[ MiRow - 1 ][ MiCol ]
  else if ( AboveRefFrame[ 0 ] == ALTREF_FRAME )
    ctx++
}
if ( AvailL ) {
  if ( !LeftSingle )
    ctx += CompoundIdxs[ MiRow ][ MiCol - 1 ]
  else if ( LeftRefFrame[ 0 ] == ALTREF_FRAME )
    ctx++
}

compound_type: The cdf is given by TileCompoundTypeCdf[ MiSize ].

interintra: The cdf is given by TileInterIntraCdf[ ctx ], where ctx is computed as follows:

ctx = Size_Group[ MiSize ] - 1

interintra_mode: The cdf is given by TileInterIntraModeCdf[ ctx ], where ctx is computed as follows:

ctx = Size_Group[ MiSize ] - 1

wedge_index: The cdf is given by TileWedgeIndexCdf[ MiSize ].

wedge_interintra: The cdf is given by TileWedgeInterIntraCdf[ MiSize ].

use_obmc: The cdf is given by TileUseObmcCdf[ MiSize ].

cfl_alpha_signs: The cdf is given by TileCflSignCdf.

cfl_alpha_u: The cdf is given by TileCflAlphaCdf[ ctx ], where ctx is obtained from the following table:

cfl_alpha_signs ctx
0 N/A
1 N/A
2 0
3 1
4 2
5 3
6 4
7 5

Note: N/A is used to indicate that no context is needed as the sign is zero and no value is decoded.

or computed as follows:

ctx = (signU - 1) * 3 + signV

Note: As shown in the previous table, the variable ctx produced by this calculation will be equal to cfl_alpha_signs - 2.

cfl_alpha_v: The cdf is given by TileCflAlphaCdf[ ctx ], where ctx is obtained from the following table:

cfl_alpha_signs ctx
0 0
1 3
2 N/A
3 1
4 4
5 N/A
6 2
7 5

Note: N/A is used to indicate that no context is needed as the sign is zero and no value is decoded.

or computed as follows:

ctx = (signV - 1) * 3 + signU

use_wiener: The cdf is given by TileUseWienerCdf.

use_sgrproj: The cdf is given by TileUseSgrprojCdf.

restoration_type: The cdf is given by TileRestorationTypeCdf.